The strip spray nozzle can be used to irrigate narrow lawns. The model, the shape of irrigation can be adjusted exactly at the edges of the lawn area. The nozzle provides medium diameter water droplets on the grass surface. The spray distance of the nozzle can be reduced by 25% using the nozzle adjusting screw at the top (it cannot be increased, the nozzle is fully open at the factory, the distance depends on the water pressure and the type of nozzle). Use a thin flat-blade screwdriver to adjust. To reduce the watering radius, turn the screw clockwise. The screw head closes more and more in the middle of the nozzle filter, thus reducing the amount of water that passes through the filter, resulting in a shorter watering radius for the nozzle. Each spray nozzle has a unique letter for easier identification. The number indicates the irrigation radius, while the letter indicates its location in the area. Irrigation spray nozzle irrigates at medium intensity and evenly, even in moderately windy weather. Its water consumption is low. There is a detachable, washable filter on the bottom of the nozzle to prevent clogging. The nozzle has a fixed outlet that determines the angle and direction of watering.
Existing models:
- SS-918 - rectangular diagram, long middle side, radius 2.7 x 5.5m
- SS-530 - rectangular diagram, long middle side, radius 1.5 x 9.1 m
- RCS-515 - rectangular diagram, from the right corner, radius 1.5 x 4.5m
- LCS-515 - rectangular diagram, from the left corner, radius 1.5 x 4.5m
- ES-515 - rectangular diagram, short middle side, radius 1.5 x 4.5m
- CS-530, -rectangular diagram, by longitudinal axis, radius 1.5 x 9.1 m
- Equipped with internal thread
- Fixed dispersion diagram
- Working pressure: 1-2.5 bar
- Recommended pressure: 2.1 bar
- Uniform spray